Product ID:QUICK DRY ENAMELS, 54-B (041390M), 54-330
MSDS Date:06/01/1990
FSC:8010
NIIN:00N065491
MSDS Number: BZQHW

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

PIGMENTS

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 2-5%

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL SPIRITS; (HYDROTREATED HEAVY NAPHTHA)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 40-45%

OSHA PEL N/K

ACGIH TLV: N/K

XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 70-75%

OSHA PEL N/K

ACGIH TLV: N/K

SIGNIFICANT HAZ FOR MAN. EYE WATERING,

RTECS: 9999999ZZ

SOLV LEVELS ARE TOO HIGH. REDNESS, ITCH, BURNING

RTECS: 9999999ZZ

DRYNESS, ITCH, CRACKING, BURNING, REDNESS & SWELLING

RTECS: 9999999ZZ

EXCESSIVE EXPOSURE TO A CORROSIVE MATERIAL,

RTECS: 9999999ZZ

DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST

RTECS: 9999999ZZ

STATED LIM, & TO REMOVE DECOMPOSITION PRODUCTS DURING

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE: SEV IRRIT. SKIN: MAY CAUSE MOD IRRIT. INHAL: VAP &
SPRAY MIST MAY BE HARMFUL IF INHAL. VAP IRRIT EYES, NOSE & THROAT.
RPTD EXPOS TO HIGH VAP CONCS MAY C AUSE IRRIT OF RESP SYS & PERM
BRAIN & CNS DMG. INTENTIONAL MISUSE BY DELIBERATELY CONC & INHAL
CONTENTS(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CAN BE HARMFUL/FATAL. CHRONIC: AVOID
LONG TERM & RPTD CONT. PROD CONTAINS TITANIUM DIOXIDE. ANIMALS
INHAL MASSIVE QTYS IF TITANIUM DIOXIDE DUST IN LONG-TERM STUDY
DEVELOPED LUNG TUMORS. POTE NTIAL FOR INHAL OF TITANIUM DIOXIDE
DUSTS FROM COATINGS IS VERY LIM. SINCE OVEREXP ARE NOT EXPECTED,
THERE IS NO (ING 8)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH W/PLENTY OF WATER FOR
AT LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ART F RESP & OTHER SUPPORTIVE MEASURES AS REQUIRED. OTHER: IF
ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF THIS PROD, CONT
POIS CTL CTR, EMER ROOM/MD IMMED: (HAVE MSDS INFO AVAIL>) INGEST,
(ING 11)

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:0.8%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUP DAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE USED TO COOL CLSD CONTRS
TO PVNT PRESS BUILD-UP & POSS (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & OPEN FLAMES. CLSD CONTRS MAY EXPLODE
WHEN EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUP DAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
ABSORB MATL & PLACE INT O CONTRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTG MIX MAY
HAVE THE HAZ OF ALL OF ITS PARTS. CONTRS SHOULD BE GROUNDED WHEN
POURING. AVOID FRE E FALL OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)
PAINT SPRAY/AIR SUPP (TC-19C) RESP MAY ALSO REDUCE EXPOS. READ RESP
MFR'S INSTRUCTIONS & LITERATURE CAREFULLY TO (ING 12)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC BELOW LOWEST SUGGESTED EXPOS LIM, LEL BELOW (ING 13)
Protective Gloves:NITRILE RUBBER, NEOPRENE RUB, (SUP DAT)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:IMPERMEABLE APRON. EMERGENCY EYEWASH &
DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC:
AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER USED, FOG NOZZ
ARE PREFERABLE. EXPLO HAZ: SURF. TOX GASES MAY FORM WHEN PROD IS
CONT BY FLAME/HOT SURF. HAZ DECOMP PROD: PRODUCE FUMES INCL CARBON
MONOXIDE. PROT GLOVES: POLYVINYL ALCOHOL.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.3
Evaporation Rate & Reference:<19 (BUTYL ACETATE=100)
Solubility in Water:<1%
Appearance and Odor:VISCOUS LIQUID, W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGS SECTION
Percent Volatiles by Volume:<88

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURF COATED W/THIS PROD
MAY (SUP DAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEME NT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.